The Safe-T-Switch® Model SS1
detects down stream clogs in condensate drains and interrupts the
thermostat circuit to shut off the unit before flooding occurs.
Works with optional Safe-T-Gard® Model SG1 condensate overflow
alarm. The Model SS1 installs inline at any downward slope from
vertical to horizontal. It can also be installed on auxiliary pan
outlets utilizing the plug included with the kit. PVC Tee body
accepts a ¾-inch slip PVC stub or drain pipe with included
bushing. Compact footprint fits well in sloped drains and tight
spaces. Approved for use as a substitute for auxilliary condensate
drains in jurisdictions where the International Mechanical Code
applies.
Installation options include inline installation
in primary condensate drains vertical or horizontal, auxilliary
(safety) pan outlet installation with included plug and plugged
installation on alternate primary drain outlets.
Design incorporates sealed, waterproof reed/magnet
float switch technology with potted electrical contacts for reliable
performance in wet environments. Float resets automatically and
after the drain is cleared. Included 6-Foot lead wires are prewired
and sealed requiring one electrical connection during installation – usually
within the air handler electrical cabinet.
Package Includes Pre-wired 6-Foot, 18 Gauge
Lead Wires, 3/4-inch Schedule 40 PVC Slip Plug, 3/4-inch Threaded
Male X Slip Male Adaptor and 3/4-inch X 1-inch Reducer Bushing
|